ValleySpeak Project Server - Installation Guide, Version 2.0
|
Table of Contents
- 1. Introduction
- 2. Minimum System Requirements
- 3. Recommended System Requirements
- 4. Workstation/Desktop Requirements (For Project Managers)
- 5. Client/Desktop Requirements (For Team Members)
- 6. Supported Network Cards
- 7. Information Needed
- 8. Installation Steps
1. Introduction
This document provides System Administrators information for the proper installation
of ValleySpeak Project Server, Version 2.0.
2. Minimum System Requirements
- Dedicated Machine
- x86 1GHz Processor
- 512 Megabytes RAM
- 20 Gigabytes Hard IDE
- IDE CDROM Drive
- VGA Monitor
- 10/100 Network Interface Card
- Internet Connectivity (For Email alerts)
3. Recommended System Requirements
- Dedicated Server Class Machine
- x86 1.5 GHz Processor
- 1 Gigabytes RAM
- 40 Gigabytes Hard IDE
- IDE CDROM Drive
- VGA Monitor
- 10/100 Network Interface Card
- Internet Connectivity (For Email Alerts)
4. Workstation/Desktop Requirements (For Project Managers)
- Microsoft Windows 2000 or Windows XP
- Microsoft Project 2000, 2002, 2003 (Microsoft Project 2007 - Coming Soon!)
- Internet Explorer 6 (with SP1), Internet Explorer 7
5. Client/Desktop Requirements (For Team Members)
- Internet Explorer 6 (with SP1), Internet Explorer 7, Netscape Navigator 6+, Mozilla 5+, Firefox 1+
6. Supported Network Cards
- 3COM Cards
- 3Com ISA EtherLink XL
- 3Com 505 network card devices
- 3COM 501 network card devices
- 3Com 503 (Etherlink II) network card
- 3Com 507 network card device
- 3Com 509/579 (Etherlink III) network card devices
- 3Com 590/900 series (592/595/597/900/905) "Vortex/Boomerang" network
card devices
- Intel Cards
- Intel EtherExpress Pro 100 (Speed 03) : Intel 82557/558/559 PCI
- EtherExpress 16 network card devices
- EtherExpressPro network card devices
- SMC Cards
- SMC 9000 series of Ethernet cards
- SMC Ultra and SMC EtherEZ ISA ethercard(8K, 83c790)
- SMC Ultra32 EISA Ethernet card (32K)
- Novell Ethernet (NE) Compatible Cards
- NE2000 ISA network card devices
- PCI NE2000 network card device
- Tulip Compatible Cards
- Digital 21x4x Tulip PCI Ethernet Cards (also on work alike chips from
- Lite-ON (PNIC) & Macronix (MXIC) & ASIX)
- Miscellaneous Cards
- RealTek 8129/8139 (not 8019/8029!) network card devices
- AT-LAN-TEC/RealTek RTL8002/8012 pocket adaptor
- SMC 83C170/175 EPIC series as used on SMC EtherPower II 9432 PCI Adapter
- EtherWORKS 3 (DE203, DE204, DE205) network card devices
- SiS (Silicon Integrated Systems) SiS 900 (7016, 630E, 962)
- WD80X3 network card devices
- DEPCA network card devices
- D-Link DE-600 Ethernet Pocket Adapter
- D-Link DE-620 Ethernet Pocket Adapter
- DE425, DE434, DE435, DE450, DE500 network card devices
- Apricot Xen-II on board Ethernet
- 100VG-AnyLan Network Adapters
- NI5210 card (i82586 Ethernet chip)
- NI6510, ni6510 EtherBlaster
- AMD PCnet32 and AMD PCnetPCI
- AMD LANCE
- AT1700 (Fujitsu 86965) network card devices
- Cabletron E21xx network card devices
- Compaq Netelligent 10/100 TX PCI UTP
- HP PCLAN+ (27247B and 27252A) network card devices
- HP PCLAN (27245 and other 27xxx series) network card devices
- ICL EtherTeam 16i network card devices
- Myson MTD-8xx 10/100 PCI ( Apparently cards sold under the name Surecom
- EP-320X-S also use this Myson chip.)
- Ansel Communications EISA 3200 network card devices
- Sundance ST201, Alta PCI Ethernet
- National Semiconductor DP8381x series PCI Ethernet
- Adaptec DuraLAN/Starfire 6915, 62022, 62044 series PCI Ethernet, 64 bit
- ANA-6922
- VIA Rhine PCI Fast Etnernet cards with either VIA 86C100A Rhine-II PCI
- or 3043 Rhine-I
- Winbond W89C840
7. Information Needed
The revolutionary installer for ValleySpeak Project Server
installs the entire server and all of its components in one simple
step. Please ensure that you have the following information
before you install this product. Please contact your System Administrator
for the same.
- Server's IP Address
- Subnet Mask
- Gateway's IP Address
- Domain Name Servers (DNS) for your network
8. Installation Steps
- 1. Download ISO image
- 2. Create installation CDROM using your favorite CDROM burning software
- 3. Insert CDROM into CD drive and boot server
NOTE:
Please note that using drag and drop to copy the ISO image on to a CDROM will not
make the CDROM bootable. Most CDROM burners come with special software. Please consult the
manual of your CDROM burning software on how to burn an ISO image.
|
|
|
